Click image to view full size image
Eyebolts are to be produced according to KS B1033 and DIN 580 while eye nuts are to be produced according to KS B 1034 and DIN 582.
The service load of the eyebolt and eye nut means the maximum allowable load against the linear load. If the load direction is away from the vertical line from the section surface, the service load is also reduced in proportion to the rate.
Forged steel eyebolt/eyenut produced by machined after forged
Supply electric plate or, self color
Stainless steel eyebolt/eyenut produced by machined after casting.
The eyebolt/eye nut should be inspected for any deformation, wearing or defect within at least 6 months.
The products which exceed the limit of 5% in deformation or wearing should be relieved of their load and replaced with new ones.
EYE NUT
